Nitrate dope
-
mike158
- Posts: 10
- Joined: Mon Jan 29, 2018 3:04 pm
Nitrate dope
what's best paint for painting over nitrate dope?
-
kittyfritters
- Posts: 732
- Joined: Tue Jan 03, 2006 6:58 pm
- Location: California
Re: Nitrate dope
mike158,
According to the 'Compatibility of Various Finishing Chemicals" chart on page 115 of Don Ross' book Flying Models almost anything from acrylic lacquer to vinyl spackle is compatible over nitrate dope. I have successfully used acrylics, acrylic ink, Krylon spray paint and floral spray over nitrate dope on tissue.
I have not used nitrate dope since 2006 because of my wife's allergies. I have been using Krylon #1305 fixative on my tissue. Unlike nitrate dope, the Krylon artist's fixative is water resistant, not waterproof. When you spray water based acrylics they have a heavy load of water. This causes the tissue to sag alarmingly after each color, however, the tissue tightens up as soon as it drys. This is not an issue with nitrate dope.
Hope this helps,
Howard
According to the 'Compatibility of Various Finishing Chemicals" chart on page 115 of Don Ross' book Flying Models almost anything from acrylic lacquer to vinyl spackle is compatible over nitrate dope. I have successfully used acrylics, acrylic ink, Krylon spray paint and floral spray over nitrate dope on tissue.
I have not used nitrate dope since 2006 because of my wife's allergies. I have been using Krylon #1305 fixative on my tissue. Unlike nitrate dope, the Krylon artist's fixative is water resistant, not waterproof. When you spray water based acrylics they have a heavy load of water. This causes the tissue to sag alarmingly after each color, however, the tissue tightens up as soon as it drys. This is not an issue with nitrate dope.
Hope this helps,
Howard
-
mike158
- Posts: 10
- Joined: Mon Jan 29, 2018 3:04 pm
Re: Nitrate dope
thank you for your reply!!
Should I sand the nitrate after it dries before putting another coat on??
Should I sand the nitrate after it dries before putting another coat on??
-
kittyfritters
- Posts: 732
- Joined: Tue Jan 03, 2006 6:58 pm
- Location: California
Re: Nitrate dope
Lightly with 400 to 600 grit.mike158 wrote:thank you for your reply!!
Should I sand the nitrate after it dries before putting another coat on??
Howard