600 Series Piper Super Cub 95

Phugoid · Post by **Phugoid** » Wed Sep 29, 2010 3:45 am

In this case I cut cirlcles of masking tape out using a compass cutter and stuck them on the middle, masking like this is ok since the middle is the natural colour of the plastic. The black is just rattle can hobby enamel.

To get the insides neat and coloured (say silver which is common) you can shove the wheel hard onto a cocktail stick or round tooth pick (both of which are tapered) then spin it round in a very slow moving drill held in a vice whilst holding the brush still.......

Phugoid · Post by **Phugoid** » Fri Oct 01, 2010 3:09 am

Starting to come together now and look like an aeroplane.

Phugoid · Post by **Phugoid** » Sat Oct 02, 2010 2:19 pm

The glazing was a bit fidley, esp. the windscreen. It looks ok though. I somehow managed to loose the celuloid with the kit so used a piece of the front of a cake box instead.

I think I should be able to finish this up tomorrow, the problem is that the weather has been awful over here in the last few weeks so getting the chance to fly might take a while......

ADW 123 · Post by **ADW 123** » Sun Oct 03, 2010 8:39 am

hows the weight?

Phugoid · Post by **Phugoid** » Sun Oct 03, 2010 9:05 am

33.5g including 1.5 times prop to hook length of 3/16" rubber and my first estimate of nose weight.

It should fly OK at that weight with the generous wing area it has.

ADW 123 · Post by **ADW 123** » Sun Oct 03, 2010 9:58 am

how do you deal with the 1.5 times amount of rubber? wouldnt the prop fall out? no one has really supplied me with real good detail with this one.

Phugoid · Post by **Phugoid** » Sun Oct 03, 2010 12:57 pm

You can braid the motor. Jim's thread on his super cub 95 gives the details of doing this. This makes it so there is tension in the rubber even when it's un-wound. OR simply let the prop fall out only the last 50 winds or so will be left, as a bonus it upsets the balance and stops your model going out of sight!

Phugoid · Post by **Phugoid** » Mon Oct 04, 2010 1:58 pm

Well it's finally done. There are a couple of ommisions from the plan. The shock absorbers as per the plan are no more than a joke. The first landing would see them break off and more likely than not puncture the tissue. I also forgot to fit the air intake on the front!

Some pictures of it. Once I get a nice day for flying I'll post some pics/video

scigs30 · Post by **scigs30** » Mon Oct 04, 2010 8:14 pm

Looks great, can't wait to see her in the air.

Phugoid · Post by **Phugoid** » Fri Oct 08, 2010 1:19 pm

I've made up a spacer and glued it into the nose to ensure that the prop now clears the nose, I angled the spacer so it gave a bit of right and down thrust as you nearly always need a bit.

I've also now balanced the model, in fact there was no balancing to do, I simply wound up the rubber 100 turns to ensure it was evenly distributed Ii did not braid this motor) and held it with tape and rested it on my fingertips at the right place and it looked good straight away. The glide from the bedroom door onto the bed looked good so I'm set to wait for the weather to clear up. Hopefully I'll be able to drag my missus along to video it.........

Phugoid · Post by **Phugoid** » Fri Oct 08, 2010 1:21 pm

ps......... the AUW is 32g

Phugoid · Post by **Phugoid** » Wed Oct 13, 2010 7:02 am

I finally managged to ge the magic combination of both having time and the right weather for a first trimming flight. I needed to add some weight to the nose to perfect the glide. Also it became apparent that it needed a considerable amount of down thrust to keep the nose down under power. I managed to catch on video the last loop or so of what was a 25s or so smooth circular flight. To get the downthrust I wedged in some packing which I think moved a bit giving the erratic end to the flight. I'll make a more permanent thrust adjustment before having another go

http://www.youtube.com/watch?v=Im5O2KTIDR0

jim · Post by **jim** » Wed Oct 13, 2010 10:52 am

that looked brilliant really nice job i hope to god i can get one to fly like that one day

scigs30 · Post by **scigs30** » Wed Oct 13, 2010 2:02 pm

I flew mine today also and almost lost it in a thermal. We are trying to upload some of the trim flight video right now.

Phugoid · Post by **Phugoid** » Wed Oct 13, 2010 2:12 pm

Thermals are somehing that I don't have to worry about this time of the year........I look forward to seeing your video. Did you neeed lots of downthrust on yours?