Guillows fly or hanger queen

Ask other modelers for a little help / knowledge ?
Post Reply

do you build for static or to fly?

static
16
25%
fly
23
36%
both
25
39%
 
Total votes: 64

freefall
Posts: 18
Joined: Fri Sep 08, 2006 2:46 pm
Location: Galesburg.Illinois
Contact:

Guillows fly or hanger queen

Post by freefall »

I was just curious as to how many modelers fly these Guillows kits and how many make them hanger queens?I have just started back into freeflight and am curious>Ronald :?: :?: :?:
Madman Stephan
Posts: 28
Joined: Fri Jul 15, 2005 9:48 am
Location: Ottawa, Ontario, Canada

Post by Madman Stephan »

That's usually a decision you make BEFORE going out to buy a new kit. I'm obviously not going to buy a kit that offers a wide range of possiblities for static display, then build it and suddenly decide to throw it off the roof of my house. If I decide to build a kit for flying, I will build it as such. Although I may use a glider as a static display, I would never use a static display for flying.
supercruiser
Posts: 405
Joined: Wed Jun 15, 2005 8:47 am

Post by supercruiser »

I build all my Guillow models for flying. Recently, have built and flown the T-28, Javelin, and Fairchild 24. Working on the 900 series P-51. Plan on flying
it also. All with rubber band power.
John G. Jedinak
Posts: 160
Joined: Mon Dec 19, 2005 6:50 pm
Location: Fort Wayne, Indiana

Post by John G. Jedinak »

I go display only.............No guts I guess..........JGJ
Xanadu
Posts: 497
Joined: Wed Sep 27, 2006 9:48 pm
Location: Anola, MB, Canada

Post by Xanadu »

Years ago I had tried them with .020, with SMASHING lack of success, if you catch my drift. So for now, I do them only for display, but I do have other brands for RC to build yet.
kittyfritters
Posts: 734
Joined: Tue Jan 03, 2006 6:58 pm
Location: California

Guillows fly or hangar queen

Post by kittyfritters »

This flight shot is a 500 series Stuka. Note: this model WAS built with the kit wood. It wasn't spectacular, flew in the 10 to 20 second range, but I could get it to fly reliably. One skeptical modeler who witnessed a 19 second flight of this model was heard to remark. "Now I've seen everything. A pig can fly!"
Yes, it is in Japanese markings.

Howard

Image
kittyfritters
Posts: 734
Joined: Tue Jan 03, 2006 6:58 pm
Location: California

Post by kittyfritters »

OOPS!

Sorry aout the picture. I'll have to stick it someplace on the net where you don't have to be logged in to see it.

Howard
kittyfritters
Posts: 734
Joined: Tue Jan 03, 2006 6:58 pm
Location: California

Post by kittyfritters »

OK! now I have the picture of the Stuka.

Image
lenard
Posts: 13
Joined: Fri Dec 08, 2006 8:04 am
Location: Adelaide, South Australia

Post by lenard »

Nice action photo there Howard. I need to spend more time flying and less building.

Cheers, Len.
Len.
freefall
Posts: 18
Joined: Fri Sep 08, 2006 2:46 pm
Location: Galesburg.Illinois
Contact:

sweet stuka

Post by freefall »

kittyfritters that,s a sweet stuka.I am working on a TBF avenger will show photo when finished to many projects not enough time,Ron
If its not flyen your not tryen!Ron
bigbill1966
Posts: 1
Joined: Tue Feb 26, 2013 3:55 pm

Re: Guillows fly or hanger queen

Post by bigbill1966 »

nice photo i,m gonna have to move to california... the problem is you spend hours building these then if you fly them you run the risk of breakages but they are aeroplanes so fly they must its only fair... but should you build for static then the wife will break it dusting it or the cat will knock it of the shelf so its fly for me cos it gets broken either way
kittyfritters
Posts: 734
Joined: Tue Jan 03, 2006 6:58 pm
Location: California

Re: Guillows fly or hanger queen

Post by kittyfritters »

bigbill1966 wrote:nice photo i,m gonna have to move to california... the problem is you spend hours building these then if you fly them you run the risk of breakages but they are aeroplanes so fly they must its only fair... but should you build for static then the wife will break it dusting it or the cat will knock it of the shelf so its fly for me cos it gets broken either way
That Stuka was built in 2004 and was flown for several years. I still have a three of the models that I built that year in flyable condition. The Stuka, unfortunately, was damaged beyond repair in a "hangar" accident. I did save all the plastic bits and I still have the plans (and my own laser cutter) so if I can find the time, or for some reason, likely that I simply find it humorous at the moment, make the time I will scan the plans and build a laser cut one. Of course, by that time Guillow will probably have the kit out in laser cut so I can just buy one.
Mitch
Posts: 1350
Joined: Mon Aug 22, 2011 9:16 pm
Location: Kent, WA

Re: Guillows fly or hanger queen

Post by Mitch »

Image

A picture is worth 1000 words... Mitch

400 series Me 109 built as per plans with guillows grey rubber motor, covered with colored lite tissue
The Cameraman
Posts: 45
Joined: Fri Apr 06, 2012 7:10 am
Location: Lancashire, England

Re: Guillows fly or hanger queen

Post by The Cameraman »

Good Morning,

my first will be for display only (a Beaver).

My second will be to correct any mistakes I make and to fly (another Beaver).

Regards

Reggie
Regards

Reggie
Jason K
Posts: 28
Joined: Fri Jun 22, 2012 2:42 pm
Location: Iowa

Re: Guillows fly or hanger queen

Post by Jason K »

The one I got too cover yet and my frist guillows kit is going to fly I hope.LOL..Now from setting around this winter it has some hanger rash on the wing an easy fix.I hope to post pix here sooner or later of it .
Post Reply