cox engines for free flight ?

Ask other modelers for a little help / knowledge ?
Post Reply
squirlye
Posts: 70
Joined: Fri Jul 06, 2012 6:20 am
Location: Vail AZ.

cox engines for free flight ?

Post by squirlye »

I was going through some boxes the other day. And I found some old cox motors from crashed CL planes. When I was a young teenager I tried my hand at CL flying. It didn't work out so well. And since I found the old engines, I was wondering if anyone here has tried gas powered free flight. Specificly Guillows planes with cox engines. I have one .020 pee wee and two .049 engines and one fox .15 The fox .15 is to big for most of Guillows planes. But the other two sizes are perfect, At least thats what it says on all of the plans. I would love to hear some stories about this, good or bad.
Grabber
Posts: 17
Joined: Tue Feb 05, 2013 1:00 pm

Re: cox engines for free flight ?

Post by Grabber »

I hope to try this some day as well. Hope some folks get the info to you so that you will be able to work out the bugs. The plans for the Lancer show some great info on free flight with a .020 Cox engine, even has some ideas on a timed stab. You are lucky to have the engines since the .020 Cox is out of production , the .049 is still made but the Cox company is out of business and that engine is made by another company. Check out the Lancer plans if no one ha sany more info , this may be enough to get you started.

Grabber
Wildpig
Posts: 529
Joined: Thu Jan 26, 2012 9:41 am

Re: cox engines for free flight ?

Post by Wildpig »

Never tried it myself. It's on my list of builds. I have an Cox .010 planned for a Guillow model, not sure which one,yet.
twospruces
Posts: 96
Joined: Tue Nov 20, 2012 9:27 pm

Re: cox engines for free flight ?

Post by twospruces »

WRT the current cox engines; a company bought the inventory of Cox, and is reselling them, but they are not machining new cylinders or pistons or or. Basically when they are gone they are gone.

I have flown a 400 mustang on .020, it was a big thrill. I was maybe 13. It soared up over some trees in a headwind, and then turned around when the engine ran out of gas, and glided right back down! awesome.

Now I need a new brass mounting plate for my .020, I damaged 2 of the 4 mounting holes.

Lots of these motors on ebay all the time.
cheers-
Mitch
Posts: 1350
Joined: Mon Aug 22, 2011 9:16 pm
Location: Kent, WA

Re: cox engines for free flight ?

Post by Mitch »

I have thought of this also...I recomend...

very very very little gas... no more than 30 seconds... otherwise say good bye to your model...

Mitch

PS Might not be bad idea to put name and adress in model also...

PPS Did I mention NOT TOO MUCH gas!
strongeagle
Posts: 12
Joined: Fri Mar 14, 2008 10:20 pm
Location: Appomattox Virginia

Re: cox engines for free flight ?

Post by strongeagle »

When I was a kid I built a Dumas Sioux (I think I still have the plans) and put a Cox .049 on the front. The Cox .049 Babe Bee reed valve engine came on a blister pack and cost $3.95 new. My brother and I chased that model half-way across the county on our bicycles! What a great airplane. Does anyone remember using 'Fox Missile Mist fuel' and a No.1 battery?

From this we learned........ DON'T PUT TOO MUCH FUEL IN THE TANK!

It flew in big right-hand circles and was a beautiful sight to see up there in the sky.

Tom S.
squirlye
Posts: 70
Joined: Fri Jul 06, 2012 6:20 am
Location: Vail AZ.

Re: cox engines for free flight ?

Post by squirlye »

ImageI have got 3 Dr-1 triplanes 2 Guillows and 1 sterling. I think I will use the .020 pee wee on one of the Guilows for free flight. The other one rubber power, and the sterling R/C. Image
Post Reply